UNISEG Container Instructions


How to Erect the UNISEG Container

To erect the UNISEG Container from its collapsed position to the front load configuration, carry out the following steps;
Step 1 – Lift up top panel (allow over-rotation to pull second panel up)
Step 2 – Lift up next panel (firmly “lock –in” to rear panel)
Step 3 – Lift up next panel (lock – in to rear panel)
Step 4 – Lift the front & top panel up to top position (latch in place)
The  UNISEG Container is now ready to receive front loaded goods.


Closing the UNISEG Container

When you want to close the Container from the front load configuration to either transport the loaded goods or to simply protect / secure your goods, then perform the following steps;

Step 1 – Pull front and top panel forward (and lower into closed position)
Step 2 – Engage ALL over centre latches (4 each side)

The UNISEG Container is now ready to transport.


Collapsing the UNISEG Container

When you want to close the Container from the front load configuration to either transport the loaded goods or to simply protect / secure your goods, then perform the following steps;

Step 1 – Pull front and top panel forward (and lower into closed position)
Step 2 – Engage ALL over centre latches (4 each side)

The UNISEG Container is now ready to transport.


Top Load Configuration

When you want to close the Container from the front load configuration to either transport the loaded goods or to simply protect / secure your goods, then perform the following steps;

Step 1 – Pull front and top panel forward (and lower into closed position)
Step 2 – Engage ALL over centre latches (4 each side)

The UNISEG Container is now ready to transport.

Print Friendly, PDF & Email